Skip to product information
$12.00
SPECIFICATIONS
Brand Name: borrence
Choice: yes
Hign-concerned Chemical: None
Origin: Mainland China
Packaging: set
Painting Medium: CANVAS,Glass,Paper
Type: Acrylic Paints
Water-Based Acrylic Varnish Gloss Clay Air Dry Varnish 10/60/120ml Long-Lasting Stone Plastic Brightener Polishing Oil Handmade Diy Pottery Clay Sealant for Glossy
Usage:
1. Apply the color after the clay is completely cured, wait until the pigment is completely dry, then use the varnishing
After the pigment is completely dry, apply varnish to protect it.
2. Use a soft nylon brush and allow at least 30 minutes for the coating to dry (drying time will increase at lower temperatures or with thicker coatings).
3. Apply as many coats as necessary, but allow each coat to dry before applying the next.
4. It takes at least 1 day for the varnish to fully penetrate (2-7 days for thicker coatings).
Scope of application:
Suitable for oven clay, air-dried modeling clay, stone clay, can be used as acrylic paintings and other surfaces of the overglaze protective agent.
Notes:
Brightness: High gloss surface effect can be achieved by thick coating and self-flow, the brightness is related to the coating thickness.
Temperature: Curing and drying is recommended to be carried out at a conventional room temperature of about 25 °, when the temperature is too high also rapid contraction
If the temperature is too high, the coating shrinks quickly, and air bubbles and cracks may occur; if the temperature is too low, the drying speed is slower.
Viscosity:
①Varnish is a water-based system, adjust the required viscosity and flow state by adding water for dilution.
② Add water and mix and leave it for about 10 minutes to eliminate air bubbles before use.
③ Add water moderately, add too much water when the viscosity is low, it will lead to thinning of the coating and decrease in brightness.
Clay coloring:
① Because the varnish is a water-based system, if the clay is colored with acrylic or oil pigment and dried, it is generally no problem to use the varnish.
If you use watercolor paints to color, it may cause haloing.
② Note that the clay must be completely cured before using pigment coloring, pigment completely dry after
After the pigment is completely dry, use varnish to seal, otherwise the drying process may cause cracks due to shrinkage.
Water resistance:
①Water-based formula, can be washed with soap and water before drying.
After drying, the coating has good water resistance, but can not be soaked in water for a long time.
